ThermoFix is ​​a high quality ceramic tiles adhesive, reinforced with acrylic resin. Offers high adhesion from start and end, and is moisture resistant and has elastic properties. It has very high anti-slip capabilities (tiles do not slip when they are put on wall) and offer long working time.

Application Fields: ThermoFix is ​​suitable for gluing absorbent and non-absorbent tiles (eg porcelain stoneware), natural stones, decorative bricks, tiles of large dimensions, etc, on walls or floors, on various substrates, especially where high adhesion elasticity and moisture resistance is required (eg old walls, floor heating, etc.) Suitable for outdoor and indoor environments.

Preparation and Application: ThermoFix is ​​slowly put into water under continuous mixing until a uniform mass is created. The mixture should rest for 10 minutes, and then mix again and again. Tiles should be laid on the substrate using a brush so that the adhesive is uniformly applied throughout the surface.

Ceramic tiles should be fixed and then pressed in the desired position. The applied surface should be covered with ceramic tiles within 20 minutes in order to avoid the formation of "cipher" or before the adhesive begins to dry.

It is important that the place where it is applied is clean without any lubrication, fat, color, or other particles that may affect the adhesive effect.
The preferred temperature for application of mortar is from + 5 ° C to + 35 ° C

Storage: Must be stored in dry place - free of moisture and frost