SIPOFIX is used as high quality adhesive for porous based  block and materials.  It is easy to use and appliance. Also it may be used as leveler to smooth surfaces. It consists of cement, minerals and additives. Do not use on the surface that has been treated with gypsum.

It is important that applicable area is clean without any lubrication, grease, ink, or other particles that can affect the adhesive effect. Surfaces that absorb water must first be wet. The preferred adhesive temperature for application is from + 5°C to + 35°C.

The drying process in the walls takes up to 6 hours , while the floor up to 24 hours . Small adjustments can be made to 30 minutes after the initial usage. It contains cement, minerals and additives

Preparation: Mass in mixed with 6-7 liters of clean water for the amount of 25 KG ( 30 % water - 70 % material). Mass must be mixed with a mixer 2 to 6 minutes before it is applied. Also mass should be mixed well before any re-usage.

Product expiration: In terms of storage according to storage instructions, the product can be used up to 6 months from the date printed on the package.

Storage instruction: Must be stored in a dry place - free of moisture and frost.